Product Description
TYPE: HYBRID LINEAR MOTORS X-AXIS: TABLE MOTION Y-AXIS: LASER
BEAM MOTION
MAX. CUTTING SIZE: 60.04 X 120.08"
WORK TABLE HEIGHT: 35.43" FROM FLOOR LEVEL
AXIS STROKE(EFFECTIVE STROKE) X AXIS: 120.87"
Y AXIS: 60.83"
Z AXIS: 3.94"
RAPID TRAVERSE RATE: X,Y: 4724 IPM
Z: 4724 IPM
AXIAL DRIVE SYSTEM: 5 AXES: LINER MOTOR DRIVE
POSITIONING ACCURACY: X&Y:+ 0.0004"/20"
Z:0.0004"/4"
REPEATABILITY: X,Y,&Z: 0.0002"
CUTTING HEAD: WITH THE LENS OF 7.5" FOCAL DISTANC; WITHSTAND
PRESSURE: 145 PSL
WORKSHEET SUPPORT METHOD BY KNIFE EDGES: 1.97" PITCHES
CHIP CONVEYOR: TRANSFER SPEED 60HZ: 51.18 IPM- INCORPORATED IN
THE MACHINE
OSCILLATION INDICATOR LAMPS: THE YELLO SIGNAL LIHJT IS LIT WHEN
THE LASER HIGH VOLTAGE GOES ON. THE RED SIGNAL LIGHT IS LIT WHEN
THE SHUTTER OPENS.
ASSIST-GAS SWITCH: KIND OF GAS: 3 GASES (OXYGEN, AIR, & 3RD GAS)
ARE SELECTED. PRESSURE SET AT 7.25 TO 87.02 PSL
PRESSURE SUPPLIED 116.03 PSI
SETTING UNIT 1.45 PSL
NUMERICAL CONTROL OF ASSIST-GAS PRESSURE: PROGRAMMING CAN SET
ASSIST-GAS PRESSURE (87.02 PSI)
POWER SUPPLY 3-PHASE AC: 103.8 KVA
WEIGHT: 33,510 LB. CHILLER UNIT AND 2-PALLET CHANGER ARE INCLUDED
LASER TPE: CO2 GAS FAR-INFRARED RAY
WAVE LENGTH: 10.6- INVISIABLE RAY
OSCILLATION MODE, CONFIGURATION: AXIAL TYPE, HIGH-SPEED AXIAL-
FLOW TYPE INTEGRATED OSCILLATOR AND POWER UNIT TYPE
CONTINUOUS RATED OUTPUT: 4000 KW LASER CW OUTPUT
OUTPUT RANGE: 800 TO 4000 W CW OUTPUT
PULSE MODE: NORMAL PULSES
PULSE FREQUENCY: 10 KHZ TO 1 KHZ: 0 TO 100%
PULSE DUTY: 1 KHZ TO 2 KHZ: 20 TO 100%
BEAM MODE: TEM MAIN CONSTITUTE
BEAM DIAMETER: 0.89" FROM OUTPUT MIRROR PORT
BEAM DIVERGENCE: 2.0 MRAD- FULL ANGLE
OUTPUT STABILITY: 2.0 %/ PER 8 HOURS- VARIABLE DEPENDING ON RATED
OUTPUT
LASER GAS: MIXED GASES OF HE, N2, AND CO2
MIXTURE RATE OF LASER GASES: HE:N2:CO2=74.9% (BALANCED):
23.4+1.0% : 1.7+0.2%
GAS CONSUMPTION AMOUNT: 1.06 FT/H IN CONTINUOUS OPERATION
BEAM SHUTTER: BUILT IN MECHANICAL SHUTTER
NAME: MAZATROL PREVIEW
CPU: 64 BITS
CONTROL METHOD: MAZATROL PREVIEW CONTROL
NUMBER OF CONTROLLED AXES: SIMULTANEOUS 3 AXIS CONTROL (X-(X1 OR
X2), Y0 AND Z-AXES), Z AXIS PROFILING
MINIMUM UNIT- 0.0001
PROGRAMMING METHOD: INTELLIGENT METHOD AND EIA/ISO METHOD
INPUT METHOD: MDI KEY INPUT POINT DEVICE
INPUT PORT: USB 1.1 X 3 PORTS
FOR PROGRAM AND DATA INPUT/OUTPUT
FOR KEYBOARD CONNECTION
FOR MOUSE CONNECTION
MEMORY CAPACITY: HARD-DISK 20 GB (PROGRAM MEMORY CAPACITY: 10GB)
NETWORK PORT: LAN PORT (FOR COMMUNICATION WITH EXTERNAL UNIT)
DISPLAY: 15" COLOR LIQUID- CRYSTAL DISPLAY (TFT TYPE)
SERVO SYSTEM SPECICIFICATION:DIGITAL
POSITION DETECTOR: ENCODER
